Dzisiaj jest 24 kwie 2018, 16:42

Strefa czasowa UTC+1godz. [letni]




Nowy temat Odpowiedz w temacie  [ Posty: 267 ]  Przejdź na stronę Poprzednia  1 ... 5, 6, 7, 8, 9, 10, 11 ... 14  Następna
Autor Wiadomość
 Tytuł: Re: dwr-960 LTE
Post: 16 mar 2018, 17:02 
Offline
Użytkownik

Rejestracja: 10 lut 2011, 09:30
Posty: 303
czyli co mam wpisać żeby ją włączyć?


Na górę
 Wyświetl profil  
Odpowiedz z cytatem  
 Tytuł: Re: dwr-960 LTE
Post: 16 mar 2018, 17:09 
Offline
Administrator
Awatar użytkownika

Rejestracja: 10 kwie 2010, 00:28
Posty: 13160
Lokalizacja: Warszawa
https://eko.one.pl/?p=openwrt-leds

echo 0 > /sys/class/leds/<nazwa>/brightness
echo 1 > /sys/class/leds/<nazwa>/brightness

_________________
http://eko.one.pl - prawie wszystko o OpenWrt


Na górę
 Wyświetl profil  
Odpowiedz z cytatem  
 Tytuł: Re: dwr-960 LTE
Post: 16 mar 2018, 17:19 
Offline
Użytkownik

Rejestracja: 10 lut 2011, 09:30
Posty: 303
Działa:

root@LEDE:~# echo 1 > /sys/class/leds/dwr-960:green:sms/brightness - nastąpiło włączenie diody sms
root@LEDE:~# echo 0 > /sys/class/leds/dwr-960:green:sms/brightness - nastąpiło wułączenie diody sms

root@LEDE:~# echo 0 > /sys/class/leds/dwr-960:green:lan/brightness - nastąpiło włączenie
root@LEDE:~# echo 1 > /sys/class/leds/dwr-960:green:lan/brightness - nastąpiło wyłączenie


root@LEDE:~# echo 0 > /sys/class/leds/dwr-960:green:status/brightness - nastąpiło włączenie
root@LEDE:~# echo 1 > /sys/class/leds/dwr-960:green:status/brightness - nastąpiło wyłączenie

root@LEDE:~# echo 0 > /sys/class/leds/dwr-960:green:wan/brightness - - nastąpiło włączenie
root@LEDE:~# echo 1 > /sys/class/leds/dwr-960:green:wan/brightness- nastąpiło wyłączenie

oot@LEDE:~# echo 1 > /sys/class/leds/dwr-960:green:wlan2g/brightness - nastąpiło włączenie
root@LEDE:~# echo 0 > /sys/class/leds/dwr-960:green:wlan2g/brightness - nastąpiło wyłączenie

Nie ma pomyłki rożnie działa i 0 i 1 raz włącza raz wyłącza to co napisałem wyżej jest aktualne


Na górę
 Wyświetl profil  
Odpowiedz z cytatem  
 Tytuł: Re: dwr-960 LTE
Post: 16 mar 2018, 17:24 
Offline
Użytkownik

Rejestracja: 10 lut 2011, 09:30
Posty: 303
Obsy pisałeś że działa sysupgrade a jak wrzucam soft @Krolika to mi wali:

The uploaded image file does not contain a supported format. Make sure that you choose the generic image format for your platform.


Na górę
 Wyświetl profil  
Odpowiedz z cytatem  
 Tytuł: Re: dwr-960 LTE
Post: 16 mar 2018, 17:25 
Offline
Administrator
Awatar użytkownika

Rejestracja: 10 kwie 2010, 00:28
Posty: 13160
Lokalizacja: Warszawa
Moje to jest 17.01 a królika to openwrt rozwojowe. Inaczej się urządzenie przedstawia. Sysupgrade -F zrób jak już.

_________________
http://eko.one.pl - prawie wszystko o OpenWrt


Na górę
 Wyświetl profil  
Odpowiedz z cytatem  
 Tytuł: Re: dwr-960 LTE
Post: 16 mar 2018, 17:38 
Offline
Administrator
Awatar użytkownika

Rejestracja: 10 kwie 2010, 00:28
Posty: 13160
Lokalizacja: Warszawa
@Krolik: polaryzację lan/wan/status zmień

_________________
http://eko.one.pl - prawie wszystko o OpenWrt


Na górę
 Wyświetl profil  
Odpowiedz z cytatem  
 Tytuł: Re: dwr-960 LTE
Post: 16 mar 2018, 17:39 
Offline
Użytkownik

Rejestracja: 10 lut 2011, 09:30
Posty: 303
Po susypgrade zdechł. Własnie leci OFW.

No i pamiętaj Obsy, ze jak podłączam przewód do LAN to zapala się dioda 4G


Na górę
 Wyświetl profil  
Odpowiedz z cytatem  
 Tytuł: Re: dwr-960 LTE
Post: 16 mar 2018, 17:49 
Offline
Administrator
Awatar użytkownika

Rejestracja: 10 kwie 2010, 00:28
Posty: 13160
Lokalizacja: Warszawa
A o tym nic nie wiem. Czyli co, od lan jest osobna dioda led, a podłączenie kabla zapala led od 4G?

_________________
http://eko.one.pl - prawie wszystko o OpenWrt


Na górę
 Wyświetl profil  
Odpowiedz z cytatem  
 Tytuł: Re: dwr-960 LTE
Post: 16 mar 2018, 17:50 
Offline
Użytkownik

Rejestracja: 10 lut 2011, 09:30
Posty: 303
Wgrałem soft Krolika ale niestety nie wstaje. Najpierw zapalają się wszystkie diody potem zostają tylko wan lan i status. Po kilku sekundach gaśnie status i lan i wan święcą ciągle. Podłączenie przewodu nie powoduje żadnych skutków nie dostaje adresu nawet dioda w laptopie się nie świeci. Na dzisiaj koniec testów. Wrócimy w następnym tygodniu


Tak podłączenie kabla zapala 4G


Na górę
 Wyświetl profil  
Odpowiedz z cytatem  
 Tytuł: Re: dwr-960 LTE
Post: 17 mar 2018, 01:08 
Offline
Użytkownik

Rejestracja: 3 mar 2018, 09:59
Posty: 68
@Cezary

Zamieniłem.

@smerka

https://www.dropbox.com/s/y4qs27rwwkmiy ... y.bin?dl=0
https://www.dropbox.com/s/3gp6wdet0wnj3 ... e.bin?dl=0

Spróbujmy jeszcze raz ethernet :)


Na górę
 Wyświetl profil  
Odpowiedz z cytatem  
 Tytuł: Re: dwr-960 LTE
Post: 19 mar 2018, 10:27 
Offline
Użytkownik

Rejestracja: 10 lut 2011, 09:30
Posty: 303
@Krolik


Zdechł na Twoim sofcie. Oto logi:

==>MT76x0_WLAN_ChipOnOff(): OnOff:0, pAd->WlanFunCtrl:0xff000003, Reg-WlanFunCtr l=0xff000003
br0: port 3(rai0) entering forwarding state
The system is going down NOW !!
Sending SIGTERM to all processes.
Jan 1 01:02:28 udhcpd[1996]: Received a SIGTERM
Requesting system reboot.
Restarting system.

CDG56CDL_0T3 Jboot B972
JRecovery Version R1.2 2016/11/15 14:11
spi device id: ef 40 18 0 0 (40180000)
SPI FLASH: W25Q128FV 16M
.
....................
Starting kernel @80000000...
[ 0.000000] Linux version 4.9.86 (krolik@krolik-T420) (gcc version 7.3.0 (Ope nWrt GCC 7.3.0 r6443+3-d88e928) ) #0 Thu Mar 15 13:22:03 2018
[ 0.000000] Board has DDR2
[ 0.000000] Analog PMU set to hw control
[ 0.000000] Digital PMU set to hw control
[ 0.000000] SoC Type: MediaTek MT7620A ver:2 eco:6
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019650 (MIPS 24KEc)
[ 0.000000] MIPS: machine is D-Link DWR-960
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 04000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 byt es
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag es: 16256
[ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs 2
[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Writing ErrCtl register=00002a30
[ 0.000000] Readback ErrCtl register=00002a30
[ 0.000000] Memory: 60428K/65536K available (3126K kernel code, 158K rwdata, 756K rodata, 176K init, 217K bss, 5108K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:256
[ 0.000000] CPU Clock: 580MHz
[ 0.000000] clocksource: systick: mask: 0xffff max_cycles: 0xffff, max_idle_n s: 583261500 ns
[ 0.000000] systick: enable autosleep mode
[ 0.000000] systick: running - mult: 214748, shift: 32
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_i dle_ns: 6590553264 ns
[ 0.000010] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 74051 15902ns
[ 0.015461] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
[ 0.080607] pid_max: default: 32768 minimum: 301
[ 0.089889] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.102941] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.122916] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 19112604462750000 ns
[ 0.142395] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.154541] pinctrl core: initialized pinctrl subsystem
[ 0.165469] NET: Registered protocol family 16
[ 0.195674] rt2880_gpio 10000600.gpio: registering 24 gpios
[ 0.206703] rt2880_gpio 10000600.gpio: registering 24 irq handlers
[ 0.219237] rt2880_gpio 10000638.gpio: registering 16 gpios
[ 0.230218] rt2880_gpio 10000638.gpio: registering 16 irq handlers
[ 0.242745] rt2880_gpio 10000660.gpio: registering 32 gpios
[ 0.253723] rt2880_gpio 10000660.gpio: registering 32 irq handlers
[ 0.266224] rt2880_gpio 10000688.gpio: registering 1 gpios
[ 0.277022] rt2880_gpio 10000688.gpio: registering 1 irq handlers
[ 0.293027] clocksource: Switched to clocksource systick
[ 0.304644] NET: Registered protocol family 2
[ 0.314061] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.327836] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.340428] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.353151] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.364685] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.377351] NET: Registered protocol family 1
[ 0.388156] rt-timer 10000100.timer: maximum frequency is 1220Hz
[ 0.400800] Crashlog allocated RAM at address 0x3f00000
[ 0.412243] workingset: timestamp_bits=30 max_order=14 bucket_order=0
[ 0.432451] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.443943] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORIT Y) (c) 2001-2006 Red Hat, Inc.
[ 0.471896] io scheduler noop registered
[ 0.479597] io scheduler deadline registered (default)
[ 0.489970] ralink-usb-phy usbphy: invalid resource
[ 0.500053] gpio-export gpio_export: 1 gpio(s) exported
[ 0.510530] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.524080] console [ttyS0] disabled
[ 0.531066] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a Palmchip BK-3103
[ 0.550843] console [ttyS0] enabled
[ 0.550843] console [ttyS0] enabled
[ 0.564619] bootconsole [early0] disabled
[ 0.564619] bootconsole [early0] disabled
[ 0.584702] spi spi0.0: force spi mode3
[ 0.603762] m25p80 spi0.0: w25q128 (16384 Kbytes)
[ 0.613184] 3 ofpart partitions found on MTD device spi0.0
[ 0.624118] Creating 3 MTD partitions on "spi0.0":
[ 0.633675] 0x000000000000-0x000000010000 : "jboot"
[ 0.644947] 0x000000010000-0x000000ff0000 : "firmware"
[ 0.657247] 2 jimage-fw partitions found on MTD device firmware
[ 0.669126] 0x000000010000-0x00000015cc2e : "kernel"
[ 0.680664] 0x00000015cc2e-0x000000ff0000 : "rootfs"
[ 0.692304] mtd: device 3 (rootfs) set to be root filesystem
[ 0.704142] 1 squashfs-split partitions found on MTD device rootfs
[ 0.716513] 0x000000358000-0x000000ff0000 : "rootfs_data"
[ 0.728800] 0x000000ff0000-0x000001000000 : "config"
[ 0.741039] libphy: Fixed MDIO Bus: probed
[ 0.749813] rt2880-pinmux pinctrl: pin io24 already requested by pinctrl; can not claim for 10100000.ethernet
[ 0.769446] rt2880-pinmux pinctrl: pin-24 (10100000.ethernet) status -22
[ 0.782809] rt2880-pinmux pinctrl: could not request pin 24 (io24) from group rgmii1 on device rt2880-pinmux
[ 0.802573] mtk_soc_eth 10100000.ethernet: Error applying setting, reverse th ings back
[ 0.818371] mtk_soc_eth: probe of 10100000.ethernet failed with error -22
[ 0.832298] rt2880_wdt 10000120.watchdog: Initialized
[ 0.843468] NET: Registered protocol family 10
[ 0.856423] NET: Registered protocol family 17
[ 0.865406] 8021q: 802.1Q VLAN Support v1.8
[ 0.880888] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
[ 0.895969] Freeing unused kernel memory: 176K
[ 0.904852] This architecture does not have kernel memory protection.
[ 1.574856] init: Console is alive
[ 1.581846] init: - watchdog -
[ 2.368379] random: fast init done
[ 2.452498] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 2.597450] usbcore: registered new interface driver usbfs
[ 2.608534] usbcore: registered new interface driver hub
[ 2.619239] usbcore: registered new device driver usb
[ 2.635005] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.649694] ehci-platform: EHCI generic platform driver
[ 2.670481] phy phy-usbphy.0: remote usb device wakeup disabled
[ 2.682287] phy phy-usbphy.0: UTMI 16bit 30MHz
[ 2.691171] ehci-platform 101c0000.ehci: EHCI Host Controller
[ 2.702659] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1
[ 2.718561] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000
[ 2.738598] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00
[ 2.752069] hub 1-0:1.0: USB hub found
[ 2.759941] hub 1-0:1.0: 1 port detected
[ 2.771513] kmodloader: done loading kernel modules from /etc/modules-boot.d/ *
[ 2.790102] init: - preinit -
Failed to connect to the switch. Use the "list" command to see which switches ar e available.
Failed to connect to the switch. Use the "list" command to see which switches ar e available.
Failed to connect to the switch. Use the "list" command to see which switches ar e available.
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 5.321368] mount_root: no usable overlay filesystem found, using tmpfs overl ay
[ 5.363594] urandom-seed: Seed file not found (/etc/urandom.seed)
[ 5.476741] procd: - early -
[ 5.482572] procd: - watchdog -
[ 5.856217] procd: - watchdog -
[ 5.862740] procd: - ubus -
[ 5.914106] procd: - init -
Please press Enter to activate this console.
[ 6.256152] kmodloader: loading kernel modules from /etc/modules.d/*
[ 6.275028] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 6.298205] Loading modules backported from Linux version wt-2017-11-01-0-gfe 248fc2c180
[ 6.314236] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[ 6.331897] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 6.351543] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
[ 6.419292] xt_time: kernel timezone is -0000
[ 6.587901] PPP generic driver version 2.4.2
[ 6.599166] NET: Registered protocol family 24
[ 6.637166] ieee80211 phy0: rt2x00lib_request_eeprom_file: Info - Loading EEP ROM data from 'soc_wmac.eeprom'.
[ 6.657150] rt2800_wmac 10180000.wmac: Direct firmware load for soc_wmac.eepr om failed with error -2
[ 6.675376] rt2800_wmac 10180000.wmac: Falling back to user helper
[ 6.733829] firmware soc_wmac.eeprom: firmware_loading_store: map pages faile d
[ 6.748473] ieee80211 phy0: rt2x00lib_request_eeprom_file: Error - Failed to request EEPROM.
[ 6.765363] rt2800_wmac: probe of 10180000.wmac failed with error -11
[ 6.810198] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 11.327928] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 14.974230] jffs2: notice: (869) jffs2_build_xattr_subsystem: complete buildi ng xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 124.648172] random: crng init done


Na górę
 Wyświetl profil  
Odpowiedz z cytatem  
 Tytuł: Re: dwr-960 LTE
Post: 19 mar 2018, 19:51 
Offline
Użytkownik

Rejestracja: 3 mar 2018, 09:59
Posty: 68
@smereka

Ok. Będzie zabawa z tym phy. Czy teraz działa którykolwiek port ethernet? Jak ledy?

EDIT:
Jeszcze dwa obrazy, jeśli możesz:

https://www.dropbox.com/s/x84r04k0b28ek ... 4.bin?dl=0
https://www.dropbox.com/s/zc6itnb3nqz4n ... 5.bin?dl=0

https://www.dropbox.com/s/a6sp0yu8qpb3c ... 4.bin?dl=0
https://www.dropbox.com/s/11x0kw7vrn4g7 ... 5.bin?dl=0


Na górę
 Wyświetl profil  
Odpowiedz z cytatem  
 Tytuł: Re: dwr-960 LTE
Post: 20 mar 2018, 00:42 
Offline
Użytkownik

Rejestracja: 10 lut 2011, 09:30
Posty: 303
Tych dwóch ostatnich dzisiejszych jeszcze nie testowałem dopiero jutro. Ale te wcześniejsze to tak jak pisałem router zdycha. Nie ma z nim komunikacji po żadnym z portów. Te logi co wkleiłem to z seriala są


Na górę
 Wyświetl profil  
Odpowiedz z cytatem  
 Tytuł: Re: dwr-960 LTE
Post: 20 mar 2018, 12:14 
Offline
Użytkownik

Rejestracja: 10 lut 2011, 09:30
Posty: 303
Na ostatnich dwóch softach działają porty 1,2,3 ten 4 - 1Gbit nie działa


Na górę
 Wyświetl profil  
Odpowiedz z cytatem  
 Tytuł: Re: dwr-960 LTE
Post: 20 mar 2018, 15:26 
Offline
Użytkownik

Rejestracja: 3 mar 2018, 09:59
Posty: 68
A masz bootlog z tych softów?


Na górę
 Wyświetl profil  
Odpowiedz z cytatem  
 Tytuł: Re: dwr-960 LTE
Post: 20 mar 2018, 16:57 
Offline
Użytkownik

Rejestracja: 10 lut 2011, 09:30
Posty: 303
firmware z port4 w nazwie

....................
Starting kernel @80000000...
[ 0.000000] Linux version 4.9.86 (krolik@krolik-T420) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r6443+3-d88e928) ) #0 Thu Mar 15 13:22:03 2018
[ 0.000000] Board has DDR2
[ 0.000000] Analog PMU set to hw control
[ 0.000000] Digital PMU set to hw control
[ 0.000000] SoC Type: MediaTek MT7620A ver:2 eco:6
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019650 (MIPS 24KEc)
[ 0.000000] MIPS: machine is D-Link DWR-960
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 04000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
[ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Writing ErrCtl register=00004f20
[ 0.000000] Readback ErrCtl register=00004f20
[ 0.000000] Memory: 60428K/65536K available (3126K kernel code, 158K rwdata, 756K rodata, 176K init, 217K bss, 5108K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:256
[ 0.000000] CPU Clock: 580MHz
[ 0.000000] clocksource: systick: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 583261500 ns
[ 0.000000] systick: enable autosleep mode
[ 0.000000] systick: running - mult: 214748, shift: 32
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns
[ 0.000009] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns
[ 0.015461] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
[ 0.080619] pid_max: default: 32768 minimum: 301
[ 0.089901] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.102953] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.122928] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.142409] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.154552] pinctrl core: initialized pinctrl subsystem
[ 0.165482] NET: Registered protocol family 16
[ 0.195649] rt2880_gpio 10000600.gpio: registering 24 gpios
[ 0.206678] rt2880_gpio 10000600.gpio: registering 24 irq handlers
[ 0.219212] rt2880_gpio 10000638.gpio: registering 16 gpios
[ 0.230193] rt2880_gpio 10000638.gpio: registering 16 irq handlers
[ 0.242719] rt2880_gpio 10000660.gpio: registering 32 gpios
[ 0.253697] rt2880_gpio 10000660.gpio: registering 32 irq handlers
[ 0.266197] rt2880_gpio 10000688.gpio: registering 1 gpios
[ 0.276994] rt2880_gpio 10000688.gpio: registering 1 irq handlers
[ 0.293013] clocksource: Switched to clocksource systick
[ 0.304630] NET: Registered protocol family 2
[ 0.314047] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.327821] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.340413] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.353136] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.364669] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.377336] NET: Registered protocol family 1
[ 0.388143] rt-timer 10000100.timer: maximum frequency is 1220Hz
[ 0.400785] Crashlog allocated RAM at address 0x3f00000
[ 0.412231] workingset: timestamp_bits=30 max_order=14 bucket_order=0
[ 0.432441] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.443932] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.471881] io scheduler noop registered
[ 0.479581] io scheduler deadline registered (default)
[ 0.489954] ralink-usb-phy usbphy: invalid resource
[ 0.500035] gpio-export gpio_export: 1 gpio(s) exported
[ 0.510512] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.524062] console [ttyS0] disabled
[ 0.531050] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a Palmchip BK-3103
[ 0.550827] console [ttyS0] enabled
[ 0.550827] console [ttyS0] enabled
[ 0.564603] bootconsole [early0] disabled
[ 0.564603] bootconsole [early0] disabled
[ 0.584692] spi spi0.0: force spi mode3
[ 0.603778] m25p80 spi0.0: w25q128 (16384 Kbytes)
[ 0.613201] 3 ofpart partitions found on MTD device spi0.0
[ 0.624134] Creating 3 MTD partitions on "spi0.0":
[ 0.633691] 0x000000000000-0x000000010000 : "jboot"
[ 0.644969] 0x000000010000-0x000000ff0000 : "firmware"
[ 0.657264] 2 jimage-fw partitions found on MTD device firmware
[ 0.669142] 0x000000010000-0x00000015ccb3 : "kernel"
[ 0.680679] 0x00000015ccb3-0x000000ff0000 : "rootfs"
[ 0.692317] mtd: device 3 (rootfs) set to be root filesystem
[ 0.704157] 1 squashfs-split partitions found on MTD device rootfs
[ 0.716528] 0x000000358000-0x000000ff0000 : "rootfs_data"
[ 0.728817] 0x000000ff0000-0x000001000000 : "config"
[ 0.741058] libphy: Fixed MDIO Bus: probed
[ 0.752797] mtk_soc_eth 10100000.ethernet eth0 (uninitialized): port 3 link up (100Mbps/Full duplex)
[ 0.771071] mtk_soc_eth 10100000.ethernet: generated random MAC address 06:1e:c1:6a:94:62
[ 0.787535] libphy: mdio: probed
[ 0.794893] mtk_soc_eth 10100000.ethernet: connected port 4 to PHY at mdio-bus:04 [uid=03a2940d, driver=Generic PHY]
[ 0.816013] mtk_soc_eth 10100000.ethernet: loaded mt7620 driver
[ 0.828530] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5
[ 0.845512] rt2880_wdt 10000120.watchdog: Initialized
[ 0.856642] NET: Registered protocol family 10
[ 0.868540] NET: Registered protocol family 17
[ 0.877525] 8021q: 802.1Q VLAN Support v1.8
[ 0.893090] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
[ 0.908107] Freeing unused kernel memory: 176K
[ 0.916990] This architecture does not have kernel memory protection.
[ 1.587598] init: Console is alive
[ 1.594688] init: - watchdog -
[ 2.342982] random: fast init done
[ 2.467380] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 2.612551] usbcore: registered new interface driver usbfs
[ 2.623638] usbcore: registered new interface driver hub
[ 2.634369] usbcore: registered new device driver usb
[ 2.650062] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.664771] ehci-platform: EHCI generic platform driver
[ 2.685542] phy phy-usbphy.0: remote usb device wakeup disabled
[ 2.697349] phy phy-usbphy.0: UTMI 16bit 30MHz
[ 2.706232] ehci-platform 101c0000.ehci: EHCI Host Controller
[ 2.717718] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1
[ 2.733628] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000
[ 2.755292] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00
[ 2.768769] hub 1-0:1.0: USB hub found
[ 2.776633] hub 1-0:1.0: 1 port detected
[ 2.788279] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 2.806779] init: - preinit -
[ 4.007776] 8021q: adding VLAN 0 to HW filter on device eth0
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 4.467195] mtk_soc_eth 10100000.ethernet eth0: port 4 link up (1000Mbps/Full duplex)
[ 5.376531] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
[ 5.417832] urandom-seed: Seed file not found (/etc/urandom.seed)
[ 5.540927] procd: - early -
[ 5.547530] procd: - watchdog -
[ 5.912164] mtk_soc_eth 10100000.ethernet eth0: port 4 link down
[ 5.929231] procd: - watchdog -
[ 5.935818] procd: - ubus -
[ 5.987117] procd: - init -
Please press Enter to activate this console.
[ 6.328213] kmodloader: loading kernel modules from /etc/modules.d/*
[ 6.347121] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 6.370303] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[ 6.386326] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[ 6.403915] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 6.423384] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
[ 6.493979] xt_time: kernel timezone is -0000
[ 6.663220] PPP generic driver version 2.4.2
[ 6.674475] NET: Registered protocol family 24
[ 6.712311] ieee80211 phy0: rt2x00lib_request_eeprom_file: Info - Loading EEPROM data from 'soc_wmac.eeprom'.
[ 6.732289] rt2800_wmac 10180000.wmac: Direct firmware load for soc_wmac.eeprom failed with error -2
[ 6.750513] rt2800_wmac 10180000.wmac: Falling back to user helper
[ 6.808701] firmware soc_wmac.eeprom: firmware_loading_store: map pages failed
[ 6.823344] ieee80211 phy0: rt2x00lib_request_eeprom_file: Error - Failed to request EEPROM.
[ 6.840234] rt2800_wmac: probe of 10180000.wmac failed with error -11
[ 6.886460] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 7.504181] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 13.566446] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[ 13.615680] jffs2_build_filesystem(): unlocking the mtd device... [ 13.654675] done.
[ 13.658515] jffs2_build_filesystem(): erasing all blocks after the end marker... [ 18.257011] 8021q: adding VLAN 0 to HW filter on device eth0
[ 18.268841] mtk_soc_eth 10100000.ethernet eth0: port 4 link up (1000Mbps/Full duplex)
[ 18.343686] device eth0 entered promiscuous mode
[ 18.395858] br-lan: port 1(eth0.1) entered blocking state
[ 18.406684] br-lan: port 1(eth0.1) entered disabled state
[ 18.417879] device eth0.1 entered promiscuous mode
[ 18.564899] br-lan: port 1(eth0.1) entered blocking state
[ 18.575692] br-lan: port 1(eth0.1) entered forwarding state
[ 18.587006] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 19.314888] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready


firmware z port5 w nazwie

Starting kernel @80000000...
[ 0.000000] Linux version 4.9.86 (krolik@krolik-T420) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r6443+3-d88e928) ) #0 Thu Mar 15 13:22:03 2018
[ 0.000000] Board has DDR2
[ 0.000000] Analog PMU set to hw control
[ 0.000000] Digital PMU set to hw control
[ 0.000000] SoC Type: MediaTek MT7620A ver:2 eco:6
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019650 (MIPS 24KEc)
[ 0.000000] MIPS: machine is D-Link DWR-960
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 04000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
[ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Writing ErrCtl register=00004730
[ 0.000000] Readback ErrCtl register=00004730
[ 0.000000] Memory: 60428K/65536K available (3126K kernel code, 158K rwdata, 756K rodata, 176K init, 217K bss, 5108K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:256
[ 0.000000] CPU Clock: 580MHz
[ 0.000000] clocksource: systick: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 583261500 ns
[ 0.000000] systick: enable autosleep mode
[ 0.000000] systick: running - mult: 214748, shift: 32
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns
[ 0.000010] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns
[ 0.015462] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
[ 0.080617] pid_max: default: 32768 minimum: 301
[ 0.089898] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.102952] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.122924] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.142404] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.154548] pinctrl core: initialized pinctrl subsystem
[ 0.165479] NET: Registered protocol family 16
[ 0.195644] rt2880_gpio 10000600.gpio: registering 24 gpios
[ 0.206673] rt2880_gpio 10000600.gpio: registering 24 irq handlers
[ 0.219206] rt2880_gpio 10000638.gpio: registering 16 gpios
[ 0.230187] rt2880_gpio 10000638.gpio: registering 16 irq handlers
[ 0.242712] rt2880_gpio 10000660.gpio: registering 32 gpios
[ 0.253690] rt2880_gpio 10000660.gpio: registering 32 irq handlers
[ 0.266191] rt2880_gpio 10000688.gpio: registering 1 gpios
[ 0.276987] rt2880_gpio 10000688.gpio: registering 1 irq handlers
[ 0.293010] clocksource: Switched to clocksource systick
[ 0.304627] NET: Registered protocol family 2
[ 0.314043] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.327818] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.340410] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.353133] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.364667] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.377333] NET: Registered protocol family 1
[ 0.388140] rt-timer 10000100.timer: maximum frequency is 1220Hz
[ 0.400782] Crashlog allocated RAM at address 0x3f00000
[ 0.412226] workingset: timestamp_bits=30 max_order=14 bucket_order=0
[ 0.432434] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.443926] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.471874] io scheduler noop registered
[ 0.479575] io scheduler deadline registered (default)
[ 0.489947] ralink-usb-phy usbphy: invalid resource
[ 0.500027] gpio-export gpio_export: 1 gpio(s) exported
[ 0.510505] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.524055] console [ttyS0] disabled
[ 0.531042] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a Palmchip BK-3103
[ 0.550821] console [ttyS0] enabled
[ 0.550821] console [ttyS0] enabled
[ 0.564595] bootconsole [early0] disabled
[ 0.564595] bootconsole [early0] disabled
[ 0.584681] spi spi0.0: force spi mode3
[ 0.603765] m25p80 spi0.0: w25q128 (16384 Kbytes)
[ 0.613188] 3 ofpart partitions found on MTD device spi0.0
[ 0.624121] Creating 3 MTD partitions on "spi0.0":
[ 0.633678] 0x000000000000-0x000000010000 : "jboot"
[ 0.644954] 0x000000010000-0x000000ff0000 : "firmware"
[ 0.657253] 2 jimage-fw partitions found on MTD device firmware
[ 0.669131] 0x000000010000-0x00000015cc00 : "kernel"
[ 0.680668] 0x00000015cc00-0x000000ff0000 : "rootfs"
[ 0.692307] mtd: device 3 (rootfs) set to be root filesystem
[ 0.704146] 1 squashfs-split partitions found on MTD device rootfs
[ 0.716517] 0x000000358000-0x000000ff0000 : "rootfs_data"
[ 0.728806] 0x000000ff0000-0x000001000000 : "config"
[ 0.741047] libphy: Fixed MDIO Bus: probed
[ 0.752858] gsw: setting port4 to ephy mode
[ 0.761270] mtk_soc_eth 10100000.ethernet eth0 (uninitialized): port 3 link up (100Mbps/Full duplex)
[ 0.779502] mtk_soc_eth 10100000.ethernet: generated random MAC address 5a:76:29:ea:65:33
[ 0.795968] libphy: mdio: probed
[ 0.802587] mtk_soc_eth 10100000.ethernet: loaded mt7620 driver
[ 0.815098] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5
[ 0.832096] rt2880_wdt 10000120.watchdog: Initialized
[ 0.843282] NET: Registered protocol family 10
[ 0.855192] NET: Registered protocol family 17
[ 0.864177] 8021q: 802.1Q VLAN Support v1.8
[ 0.879659] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
[ 0.894743] Freeing unused kernel memory: 176K
[ 0.903627] This architecture does not have kernel memory protection.
[ 1.574060] init: Console is alive
[ 1.581051] init: - watchdog -
[ 2.352980] random: fast init done
[ 2.451071] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 2.595695] usbcore: registered new interface driver usbfs
[ 2.606777] usbcore: registered new interface driver hub
[ 2.617486] usbcore: registered new device driver usb
[ 2.633230] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.647905] ehci-platform: EHCI generic platform driver
[ 2.668679] phy phy-usbphy.0: remote usb device wakeup disabled
[ 2.680488] phy phy-usbphy.0: UTMI 16bit 30MHz
[ 2.689369] ehci-platform 101c0000.ehci: EHCI Host Controller
[ 2.700854] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1
[ 2.716753] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000
[ 2.737388] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00
[ 2.750849] hub 1-0:1.0: USB hub found
[ 2.758729] hub 1-0:1.0: 1 port detected
[ 2.770369] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 2.788883] init: - preinit -
[ 3.990355] 8021q: adding VLAN 0 to HW filter on device eth0
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 5.342659] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
[ 5.384137] urandom-seed: Seed file not found (/etc/urandom.seed)
[ 5.508171] procd: - early -
[ 5.514001] procd: - watchdog -
[ 5.887938] procd: - watchdog -
[ 5.894575] procd: - ubus -
[ 5.945782] procd: - init -
Please press Enter to activate this console.
[ 6.287170] kmodloader: loading kernel modules from /etc/modules.d/*
[ 6.306063] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 6.329220] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[ 6.345250] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[ 6.362936] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 6.382434] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
[ 6.449821] xt_time: kernel timezone is -0000
[ 6.618690] PPP generic driver version 2.4.2
[ 6.629956] NET: Registered protocol family 24
[ 6.667763] ieee80211 phy0: rt2x00lib_request_eeprom_file: Info - Loading EEPROM data from 'soc_wmac.eeprom'.
[ 6.687729] rt2800_wmac 10180000.wmac: Direct firmware load for soc_wmac.eeprom failed with error -2
[ 6.705950] rt2800_wmac 10180000.wmac: Falling back to user helper
[ 6.764258] firmware soc_wmac.eeprom: firmware_loading_store: map pages failed
[ 6.778898] ieee80211 phy0: rt2x00lib_request_eeprom_file: Error - Failed to request EEPROM.
[ 6.795787] rt2800_wmac: probe of 10180000.wmac failed with error -11
[ 6.842434] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 7.610616] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 13.523318] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[ 13.561625] jffs2_build_filesystem(): unlocking the mtd device... [ 13.600515] done.
[ 13.604360] jffs2_build_filesystem(): erasing all blocks after the end marker... [ 18.213491] 8021q: adding VLAN 0 to HW filter on device eth0
[ 18.282499] device eth0 entered promiscuous mode
[ 18.337058] br-lan: port 1(eth0.1) entered blocking state
[ 18.347894] br-lan: port 1(eth0.1) entered disabled state
[ 18.359074] device eth0.1 entered promiscuous mode
[ 18.504546] br-lan: port 1(eth0.1) entered blocking state
[ 18.515380] br-lan: port 1(eth0.1) entered forwarding state
[ 18.526697] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 19.220764] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready


Na górę
 Wyświetl profil  
Odpowiedz z cytatem  
 Tytuł: Re: dwr-960 LTE
Post: 20 mar 2018, 20:04 
Offline
Użytkownik

Rejestracja: 3 mar 2018, 09:59
Posty: 68
Wydaje się, że port 4 ruszył, ale ustawiłem go jako WAN. Teraz już powinien być LANem:

https://www.dropbox.com/s/y4qs27rwwkmiy ... y.bin?dl=0
https://www.dropbox.com/s/3gp6wdet0wnj3 ... e.bin?dl=0

Jak ledy?


Na górę
 Wyświetl profil  
Odpowiedz z cytatem  
 Tytuł: Re: dwr-960 LTE
Post: 21 mar 2018, 11:52 
Offline
Użytkownik

Rejestracja: 10 lut 2011, 09:30
Posty: 303
Wgrane Twoje najnowsze dzieło. Na porcie 4 ani widu ani słychu :( Oto logi:


CDG56CDL_0T3 Jboot B972
JRecovery Version R1.2 2016/11/15 14:11
spi device id: ef 40 18 0 0 (40180000)
SPI FLASH: W25Q128FV 16M
.
....................
Starting kernel @80000000...
[ 0.000000] Linux version 4.9.86 (krolik@krolik-T420) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r6443+3-d88e928) ) #0 Tue Mar 20 06:14:30 2018
[ 0.000000] Board has DDR2
[ 0.000000] Analog PMU set to hw control
[ 0.000000] Digital PMU set to hw control
[ 0.000000] SoC Type: MediaTek MT7620A ver:2 eco:6
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019650 (MIPS 24KEc)
[ 0.000000] MIPS: machine is D-Link DWR-960
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 04000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
[ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Writing ErrCtl register=00004f20
[ 0.000000] Readback ErrCtl register=00004f20
[ 0.000000] Memory: 60428K/65536K available (3126K kernel code, 158K rwdata, 756K rodata, 176K init, 217K bss, 5108K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:256
[ 0.000000] CPU Clock: 580MHz
[ 0.000000] clocksource: systick: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 583261500 ns
[ 0.000000] systick: enable autosleep mode
[ 0.000000] systick: running - mult: 214748, shift: 32
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns
[ 0.000010] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns
[ 0.015462] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
[ 0.080609] pid_max: default: 32768 minimum: 301
[ 0.089892] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.102944] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.122919] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.142399] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.154544] pinctrl core: initialized pinctrl subsystem
[ 0.165472] NET: Registered protocol family 16
[ 0.195671] rt2880_gpio 10000600.gpio: registering 24 gpios
[ 0.206701] rt2880_gpio 10000600.gpio: registering 24 irq handlers
[ 0.219234] rt2880_gpio 10000638.gpio: registering 16 gpios
[ 0.230214] rt2880_gpio 10000638.gpio: registering 16 irq handlers
[ 0.242741] rt2880_gpio 10000660.gpio: registering 32 gpios
[ 0.253719] rt2880_gpio 10000660.gpio: registering 32 irq handlers
[ 0.266221] rt2880_gpio 10000688.gpio: registering 1 gpios
[ 0.277019] rt2880_gpio 10000688.gpio: registering 1 irq handlers
[ 0.293023] clocksource: Switched to clocksource systick
[ 0.304643] NET: Registered protocol family 2
[ 0.314062] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.327837] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.340429] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.353151] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.364685] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.377352] NET: Registered protocol family 1
[ 0.388158] rt-timer 10000100.timer: maximum frequency is 1220Hz
[ 0.400803] Crashlog allocated RAM at address 0x3f00000
[ 0.412246] workingset: timestamp_bits=30 max_order=14 bucket_order=0
[ 0.432455] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.443946] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.471899] io scheduler noop registered
[ 0.479600] io scheduler deadline registered (default)
[ 0.489974] ralink-usb-phy usbphy: invalid resource
[ 0.500056] gpio-export gpio_export: 1 gpio(s) exported
[ 0.510534] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.524083] console [ttyS0] disabled
[ 0.531069] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a Palmchip BK-3103
[ 0.550847] console [ttyS0] enabled
[ 0.550847] console [ttyS0] enabled
[ 0.564622] bootconsole [early0] disabled
[ 0.564622] bootconsole [early0] disabled
[ 0.584705] spi spi0.0: force spi mode3
[ 0.603761] m25p80 spi0.0: w25q128 (16384 Kbytes)
[ 0.613184] 3 ofpart partitions found on MTD device spi0.0
[ 0.624117] Creating 3 MTD partitions on "spi0.0":
[ 0.633675] 0x000000000000-0x000000010000 : "jboot"
[ 0.644946] 0x000000010000-0x000000ff0000 : "firmware"
[ 0.657247] 2 jimage-fw partitions found on MTD device firmware
[ 0.669125] 0x000000010000-0x00000015cca8 : "kernel"
[ 0.680663] 0x00000015cca8-0x000000ff0000 : "rootfs"
[ 0.692304] mtd: device 3 (rootfs) set to be root filesystem
[ 0.704141] 1 squashfs-split partitions found on MTD device rootfs
[ 0.716514] 0x000000358000-0x000000ff0000 : "rootfs_data"
[ 0.728799] 0x000000ff0000-0x000001000000 : "config"
[ 0.741038] libphy: Fixed MDIO Bus: probed
[ 0.752799] mtk_soc_eth 10100000.ethernet eth0 (uninitialized): port 1 link up (100Mbps/Full duplex)
[ 0.771072] mtk_soc_eth 10100000.ethernet: generated random MAC address ce:e1:c7:7c:c6:7e
[ 0.787539] libphy: mdio: probed
[ 0.794896] mtk_soc_eth 10100000.ethernet: connected port 4 to PHY at mdio-bus:04 [uid=03a2940d, driver=Generic PHY]
[ 0.816014] mtk_soc_eth 10100000.ethernet: loaded mt7620 driver
[ 0.828519] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5
[ 0.845489] rt2880_wdt 10000120.watchdog: Initialized
[ 0.856620] NET: Registered protocol family 10
[ 0.868523] NET: Registered protocol family 17
[ 0.877507] 8021q: 802.1Q VLAN Support v1.8
[ 0.893070] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
[ 0.908081] Freeing unused kernel memory: 176K
[ 0.916962] This architecture does not have kernel memory protection.
[ 1.587513] init: Console is alive
[ 1.594602] init: - watchdog -
[ 2.351754] random: fast init done
[ 2.467152] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 2.612328] usbcore: registered new interface driver usbfs
[ 2.623415] usbcore: registered new interface driver hub
[ 2.634145] usbcore: registered new device driver usb
[ 2.649832] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.664545] ehci-platform: EHCI generic platform driver
[ 2.685318] phy phy-usbphy.0: remote usb device wakeup disabled
[ 2.697124] phy phy-usbphy.0: UTMI 16bit 30MHz
[ 2.706007] ehci-platform 101c0000.ehci: EHCI Host Controller
[ 2.717493] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1
[ 2.733404] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000
[ 2.755148] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00
[ 2.768622] hub 1-0:1.0: USB hub found
[ 2.776488] hub 1-0:1.0: 1 port detected
[ 2.788105] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 2.806605] init: - preinit -
[ 4.009059] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4.020723] 8021q: adding VLAN 0 to HW filter on device eth0
[ 4.032492] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 4.484949] mtk_soc_eth 10100000.ethernet eth0: port 4 link up (1000Mbps/Full duplex)
[ 5.398572] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
[ 5.440070] urandom-seed: Seed file not found (/etc/urandom.seed)
[ 5.564138] procd: - early -
[ 5.569975] procd: - watchdog -
[ 5.926744] mtk_soc_eth 10100000.ethernet eth0: port 4 link down
[ 5.951099] procd: - watchdog -
[ 5.957737] procd: - ubus -
[ 6.008884] procd: - init -
Please press Enter to activate this console.
[ 6.350201] kmodloader: loading kernel modules from /etc/modules.d/*
[ 6.369100] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 6.392112] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[ 6.408136] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[ 6.425813] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 6.445239] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
[ 6.516256] xt_time: kernel timezone is -0000
[ 6.685056] PPP generic driver version 2.4.2
[ 6.696299] NET: Registered protocol family 24
[ 6.733955] ieee80211 phy0: rt2x00lib_request_eeprom_file: Info - Loading EEPROM data from 'soc_wmac.eeprom'.
[ 6.753934] rt2800_wmac 10180000.wmac: Direct firmware load for soc_wmac.eeprom failed with error -2
[ 6.772158] rt2800_wmac 10180000.wmac: Falling back to user helper
[ 6.830369] firmware soc_wmac.eeprom: firmware_loading_store: map pages failed
[ 6.845013] ieee80211 phy0: rt2x00lib_request_eeprom_file: Error - Failed to request EEPROM.
[ 6.861905] rt2800_wmac: probe of 10180000.wmac failed with error -11
[ 6.906645] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 11.325517] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 13.574859] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[ 13.625670] jffs2_build_filesystem(): unlocking the mtd device... [ 13.664650] done.
[ 13.668490] jffs2_build_filesystem(): erasing all blocks after the end marker... [ 18.327597] 8021q: adding VLAN 0 to HW filter on device eth0
[ 18.339429] mtk_soc_eth 10100000.ethernet eth0: port 4 link up (1000Mbps/Full duplex)
[ 18.411898] device eth0 entered promiscuous mode
[ 18.465605] br-lan: port 1(eth0.1) entered blocking state
[ 18.476428] br-lan: port 1(eth0.1) entered disabled state
[ 18.487622] device eth0.1 entered promiscuous mode
[ 18.630883] br-lan: port 1(eth0.1) entered blocking state
[ 18.641712] br-lan: port 1(eth0.1) entered forwarding state
[ 18.653025] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 19.394820] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 49.239850] mtk_soc_eth 10100000.ethernet eth0: port 1 link down
[ 49.252575] br-lan: port 1(eth0.1) entered disabled state
[ 54.099241] mtk_soc_eth 10100000.ethernet eth0: port 2 link up (100Mbps/Full duplex)
[ 54.115136] br-lan: port 1(eth0.1) entered blocking state
[ 54.125929] br-lan: port 1(eth0.1) entered forwarding state
[ 73.510564] mtk_soc_eth 10100000.ethernet eth0: port 2 link down
[ 73.523287] br-lan: port 1(eth0.1) entered disabled state
[ 78.342310] mtk_soc_eth 10100000.ethernet eth0: port 3 link up (100Mbps/Full duplex)
[ 78.358193] br-lan: port 1(eth0.1) entered blocking state
[ 78.368991] br-lan: port 1(eth0.1) entered forwarding state
[ 87.258662] mtk_soc_eth 10100000.ethernet eth0: port 3 link down
[ 87.271867] br-lan: port 1(eth0.1) entered disabled state
[ 121.944642] random: crng init done
[ 326.224384] done.
[ 326.228289] jffs2: notice: (878) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.


Na górę
 Wyświetl profil  
Odpowiedz z cytatem  
 Tytuł: Re: dwr-960 LTE
Post: 21 mar 2018, 19:05 
Offline
Użytkownik

Rejestracja: 3 mar 2018, 09:59
Posty: 68
@smereka

A możesz jutro w failsafe zobaczyć czy działa?


Na górę
 Wyświetl profil  
Odpowiedz z cytatem  
 Tytuł: Re: dwr-960 LTE
Post: 22 mar 2018, 11:11 
Offline
Użytkownik

Rejestracja: 10 lut 2011, 09:30
Posty: 303
CDG56CDL_0T3 Jboot B972
JRecovery Version R1.2 2016/11/15 14:11
spi device id: ef 40 18 0 0 (40180000)
SPI FLASH: W25Q128FV 16M
.
....................
Starting kernel @80000000...
[ 0.000000] Linux version 4.9.86 (krolik@krolik-T420) (gcc version 7.3.0 (Ope nWrt GCC 7.3.0 r6443+3-d88e928) ) #0 Tue Mar 20 06:14:30 2018
[ 0.000000] Board has DDR2
[ 0.000000] Analog PMU set to hw control
[ 0.000000] Digital PMU set to hw control
[ 0.000000] SoC Type: MediaTek MT7620A ver:2 eco:6
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019650 (MIPS 24KEc)
[ 0.000000] MIPS: machine is D-Link DWR-960
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 04000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 byt es
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag es: 16256
[ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs 2
[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Writing ErrCtl register=0002083e
[ 0.000000] Readback ErrCtl register=0002083e
[ 0.000000] Memory: 60428K/65536K available (3126K kernel code, 158K rwdata, 756K rodata, 176K init, 217K bss, 5108K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:256
[ 0.000000] CPU Clock: 580MHz
[ 0.000000] clocksource: systick: mask: 0xffff max_cycles: 0xffff, max_idle_n s: 583261500 ns
[ 0.000000] systick: enable autosleep mode
[ 0.000000] systick: running - mult: 214748, shift: 32
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_i dle_ns: 6590553264 ns
[ 0.000010] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 74051 15902ns
[ 0.015462] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
[ 0.080605] pid_max: default: 32768 minimum: 301
[ 0.089888] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.102939] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.122915] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 19112604462750000 ns
[ 0.142396] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.154541] pinctrl core: initialized pinctrl subsystem
[ 0.165470] NET: Registered protocol family 16
[ 0.195668] rt2880_gpio 10000600.gpio: registering 24 gpios
[ 0.206697] rt2880_gpio 10000600.gpio: registering 24 irq handlers
[ 0.219230] rt2880_gpio 10000638.gpio: registering 16 gpios
[ 0.230209] rt2880_gpio 10000638.gpio: registering 16 irq handlers
[ 0.242737] rt2880_gpio 10000660.gpio: registering 32 gpios
[ 0.253715] rt2880_gpio 10000660.gpio: registering 32 irq handlers
[ 0.266216] rt2880_gpio 10000688.gpio: registering 1 gpios
[ 0.277013] rt2880_gpio 10000688.gpio: registering 1 irq handlers
[ 0.293021] clocksource: Switched to clocksource systick
[ 0.304639] NET: Registered protocol family 2
[ 0.314060] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.327835] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.340426] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.353148] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.364682] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.377350] NET: Registered protocol family 1
[ 0.388155] rt-timer 10000100.timer: maximum frequency is 1220Hz
[ 0.400800] Crashlog allocated RAM at address 0x3f00000
[ 0.412242] workingset: timestamp_bits=30 max_order=14 bucket_order=0
[ 0.432452] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.443943] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORIT Y) (c) 2001-2006 Red Hat, Inc.
[ 0.471895] io scheduler noop registered
[ 0.479596] io scheduler deadline registered (default)
[ 0.489970] ralink-usb-phy usbphy: invalid resource
[ 0.500052] gpio-export gpio_export: 1 gpio(s) exported
[ 0.510529] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.524079] console [ttyS0] disabled
[ 0.531066] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a Palmchip BK-3103
[ 0.550843] console [ttyS0] enabled
[ 0.550843] console [ttyS0] enabled
[ 0.564619] bootconsole [early0] disabled
[ 0.564619] bootconsole [early0] disabled
[ 0.584701] spi spi0.0: force spi mode3
[ 0.603712] m25p80 spi0.0: w25q128 (16384 Kbytes)
[ 0.613134] 3 ofpart partitions found on MTD device spi0.0
[ 0.624068] Creating 3 MTD partitions on "spi0.0":
[ 0.633624] 0x000000000000-0x000000010000 : "jboot"
[ 0.644896] 0x000000010000-0x000000ff0000 : "firmware"
[ 0.657195] 2 jimage-fw partitions found on MTD device firmware
[ 0.669073] 0x000000010000-0x00000015cca8 : "kernel"
[ 0.680613] 0x00000015cca8-0x000000ff0000 : "rootfs"
[ 0.692254] mtd: device 3 (rootfs) set to be root filesystem
[ 0.704092] 1 squashfs-split partitions found on MTD device rootfs
[ 0.716464] 0x000000358000-0x000000ff0000 : "rootfs_data"
[ 0.728749] 0x000000ff0000-0x000001000000 : "config"
[ 0.740988] libphy: Fixed MDIO Bus: probed
[ 0.752753] mtk_soc_eth 10100000.ethernet eth0 (uninitialized): port 2 link u p (100Mbps/Full duplex)
[ 0.771025] mtk_soc_eth 10100000.ethernet: generated random MAC address 26:0b :97:b0:d9:7d
[ 0.787492] libphy: mdio: probed
[ 0.794848] mtk_soc_eth 10100000.ethernet: connected port 4 to PHY at mdio-bu s:04 [uid=03a2940d, driver=Generic PHY]
[ 0.815966] mtk_soc_eth 10100000.ethernet: loaded mt7620 driver
[ 0.828471] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0 100000, irq 5
[ 0.845441] rt2880_wdt 10000120.watchdog: Initialized
[ 0.856573] NET: Registered protocol family 10
[ 0.868475] NET: Registered protocol family 17
[ 0.877460] 8021q: 802.1Q VLAN Support v1.8
[ 0.892945] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
[ 0.908029] Freeing unused kernel memory: 176K
[ 0.916910] This architecture does not have kernel memory protection.
[ 1.586837] init: Console is alive
[ 1.593924] init: - watchdog -
[ 2.359028] random: fast init done
[ 2.463719] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 2.609334] usbcore: registered new interface driver usbfs
[ 2.620417] usbcore: registered new interface driver hub
[ 2.631144] usbcore: registered new device driver usb
[ 2.646650] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.661348] ehci-platform: EHCI generic platform driver
[ 2.682123] phy phy-usbphy.0: remote usb device wakeup disabled
[ 2.693931] phy phy-usbphy.0: UTMI 16bit 30MHz
[ 2.702801] ehci-platform 101c0000.ehci: EHCI Host Controller
[ 2.714289] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1
[ 2.730195] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000
[ 2.749672] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00
[ 2.763156] hub 1-0:1.0: USB hub found
[ 2.771017] hub 1-0:1.0: 1 port detected
[ 2.782636] kmodloader: done loading kernel modules from /etc/modules-boot.d/ *
[ 2.801142] init: - preinit -
[ 4.025780] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4.037478] 8021q: adding VLAN 0 to HW filter on device eth0
[ 4.049251] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 4.467966] mtk_soc_eth 10100000.ethernet eth0: port 4 link up (1000Mbps/Full duplex)
- failsafe button wps was pressed -
- failsafe -
Generating key, this may take a while...
Public key portion is:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAAAgQCVFVmMHkiUpES1075o6C+wE9TBtD3VyMlpPbLLNhPW 3BpydxBXN0KU9GFfiuQpaQ4iE6orhE5wMqXy4gLvpc2wtYJf96LkWbZuzgakSbE0Mem2NGRAGONo0jU+ jSKYz4E/Me/szRIubCeSGf8oXh7QJ7VjXogfN7JE1AzZmwv/JQ== root@(none)
Fingerprint: sha1!! 29:f5:34:75:24:08:8c:05:8e:18:55:79:3e:4b:97:17:a5:51:fe:10


BusyBox v1.27.2 () built-in shell (ash)

ash: can't access tty; job control turned off
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
OpenWrt SNAPSHOT, r6443+4-d88e928
-----------------------------------------------------
================= FAILSAFE MODE active ================
special commands:
* firstboot reset settings to factory defaults
* mount_root mount root-partition with config files

after mount_root:
* passwd change root's password
* /etc/config directory with config files

for more help see:
http://wiki.openwrt.org/doc/howto/generic.failsafe
=======================================================

root@(none):/# [ 10.106810] usb 1-1: new high-speed USB device number 2 using ehci-platform

root@(none):/# [ 13.931777] mtk_soc_eth 10100000.ethernet eth0: port 2 link do wn
[ 15.542023] mtk_soc_eth 10100000.ethernet eth0: port 1 link up (100Mbps/Full duplex)
[ 21.391637] mtk_soc_eth 10100000.ethernet eth0: port 1 link down
[ 22.741509] mtk_soc_eth 10100000.ethernet eth0: port 2 link up (100Mbps/Full duplex)
[ 23.924162] mtk_soc_eth 10100000.ethernet eth0: port 2 link down
[ 25.281088] mtk_soc_eth 10100000.ethernet eth0: port 3 link up (100Mbps/Full duplex)
[ 27.033261] mtk_soc_eth 10100000.ethernet eth0: port 3 link down


Port 4 nie rabotajet


Na górę
 Wyświetl profil  
Odpowiedz z cytatem  
Wyświetl posty nie starsze niż:  Sortuj wg  
Nowy temat Odpowiedz w temacie  [ Posty: 267 ]  Przejdź na stronę Poprzednia  1 ... 5, 6, 7, 8, 9, 10, 11 ... 14  Następna

Strefa czasowa UTC+1godz. [letni]


Kto jest online

Użytkownicy przeglądający to forum: Obecnie na forum nie ma żadnego zarejestrowanego użytkownika i 1 gość


Nie możesz tworzyć nowych tematów
Nie możesz odpowiadać w tematach
Nie możesz zmieniać swoich postów
Nie możesz usuwać swoich postów

Szukaj:
Przejdź do:  
cron
designed by digi-led.pl
...Copyright © 2010-2013, Ekipa openrouter.info